Thornbury is a tightly held inner-northern suburb of Victorian and Edwardian houses, Californian bungalows and solid interwar brick homes strung along High Street and the streets around it. FreshDuct installs certified R6.0 ceiling insulation across Thornbury.
Three details and we'll call you back — usually the same day.


















Thornbury is a tightly held inner-northern suburb of Victorian and Edwardian houses, Californian bungalows and solid interwar brick homes strung along High Street and the streets around it. Much of the stock is a century old, well-kept but often still carrying the thin original insulation — or none — that period homes of the inner north are known for.
The single-fronted Victorian and Edwardian homes here have tighter, shallower roofs where hand-fitting to the eaves and around the hips is what separates a proper job from a token one. The interwar bungalows offer more room but frequently reveal settled, compacted batts. Either way, a clean and continuous R6.0 layer — sealed to the perimeter and around every penetration — is the highest-impact upgrade, steadying temperature in homes that were built long before insulation was standard.
Thornbury's Victorian and Edwardian homes have shallow, cramped cavities. We hand-fit batts right to the eaves and around the hips so no cold gaps are left at the edges.
Many homes here still carry thin, compacted original batts. We measure the real depth and top up or replace to restore a full R6.0 layer.
In these aged ceilings we keep correct clearances around downlights, old flues and wiring, leaving the roof both well-insulated and safe.
Heat rises, and in an under-insulated home it pours out through the ceiling in winter and floods in from a baking roof cavity in summer. The ceiling is the single biggest thermal weak point in most Melbourne homes — which is why it's the first place to fix and the one that returns the most comfort for the money.
A properly insulated ceiling isn't just a layer of batts thrown in. It's a continuous, sealed R6.0 blanket that reaches the eaves, wraps around every penetration and leaves no cold gaps — so your heating and cooling stop fighting a constant loss and the whole house holds a steadier temperature.
Recent insulation work across Melbourne — the same certified R6.0 standard we bring to every Thornbury job.






| Ceiling insulation standard | Cheap installers | FreshDuct |
|---|---|---|
| Roof inspection | Quoted blind or over the phone | We get into the roof, measure the existing R-value and check access first |
| Coverage | Batts dropped in the middle, eaves left bare | Hand-fitted right to the eaves and sealed around every gap |
| R-value | Whatever is cheapest | A full R6.0 ceiling standard with certified thermal batts |
| Old insulation | Left in place or covered over | Removed and the cavity vacuumed clean where it is damaged or contaminated |
| Clearances | Ignored around downlights & flues | Correct clearances kept around downlights, flues and wiring |
| Proof of work | None | Before & after photos of your finished roof |
A continuous, sealed R6.0 layer across your whole ceiling — no cold gaps left behind.
We get into the roof space, measure the existing insulation and R-value, and check access, wiring and any moisture.
You get a fixed written quote — including removal of old or damaged insulation if the cavity needs clearing first.
Certified installers hand-fit certified batts end to end — right to the eaves, sealed around every gap — for an even, continuous layer.
We confirm full coverage and correct clearances, then hand over before/after photos of the finished roof.
A properly insulated ceiling cuts the heat lost in winter and gained in summer, so your heating and cooling run less.
Rooms stop swinging hot and cold — the whole home holds a steadier, more comfortable temperature.
We install to a full R6.0 ceiling standard with certified thermal batts, not whatever happens to be cheapest.
Certified R6.0 batts, old-insulation removal and top-ups in the roof space.
The full FreshDuct home insulation range across Melbourne.
Batts between the floor joists to stop cold floors and downward heat loss.
Retrofit cavity fill and new-wall insulation for a continuous thermal barrier.
Full roof, wall and floor insulation for new builds to NCC / BASIX.
Industrial vacuum removal of old, damaged or contaminated insulation.
We serve Thornbury and the inner north — Northcote, Preston, Coburg, Fairfield and across to Reservoir. Free, no-obligation inspections.
We insulate homes right across Thornbury and the surrounding suburbs.
Yes — that's the standard job here. The roof is shallow and the work is all about reaching the eaves and hips cleanly from the one manhole. We check access on a free inspection and quote for full, edge-to-edge coverage.
Often not. Period-home insulation is usually thin and has settled over the decades to well below its rating. We measure the real depth and either top it up or, if it's degraded, remove it and lay fresh R6.0 batts.
It depends on your ceiling area, the R-value and whether old insulation needs removing first. That's why we inspect the roof and give a fixed written quote rather than a phone estimate — no call-out fee and no obligation.
If the existing insulation is damaged, damp or contaminated, yes — we vacuum it out with industrial equipment and leave the cavity clean and inspectable before installing new R6.0 batts. If it's clean and dry, we can top up over it.
Most single-storey homes are done in a day. Larger or two-storey homes, or jobs that need old insulation removed first, can take a little longer — we confirm the timeframe with your quote.
Book a free roof inspection and fixed written quote for your Thornbury home — no call-out fee, no obligation.
No call-out fee, no obligation.