🌞 Winter Specials! | 🌡️ AC, Heater & Split System Cleaning | 💧 Evap Cooler Service | 🔍 HVAC Inspections | 📞 Call Today for a Free Quote!
🌞 Winter Specials! | 🌡️ AC, Heater & Split | 💧 Evap Cooler | 🔍 HVAC Check | 📞Free Quote!
Glen Iris is a leafy inner-south-eastern suburb of Edwardian villas, interwar Californian bungalows and Tudor-revival brick homes on established, tree-lined streets, with a scattering of newer townhouses on subdivided blocks. FreshDuct installs certified R6.0 ceiling insulation across Glen Iris.
Three details and we'll call you back — usually the same day.
Glen Iris is a leafy inner-south-eastern suburb of Edwardian villas, interwar Californian bungalows and Tudor-revival brick homes on established, tree-lined streets, with a scattering of newer townhouses on subdivided blocks. It is prized period housing, much of it a century old and still relying on the thin original insulation — or none — that homes of the era were built with.
The Edwardian and interwar homes here typically have hipped roofs with a mix of gables and valleys, where hand-fitting to the eaves and around the corners is what makes coverage genuinely continuous. Many still hold brittle, settled batts long past their rated life, or bare stretches from past renovation. A clean, sealed R6.0 layer across the whole ceiling is the single most effective way to steady these homes, which were built long before insulation was a standard part of the roof.
Glen Iris's Edwardian and interwar homes have hipped roofs with gables and valleys. We hand-fit into every corner and eave so coverage stays continuous.
Many homes here carry thin, settled batts past their life, or bare patches from past work. We clear what's failed and lay a fresh, full R6.0 layer.
In these older ceilings we keep correct clearances around downlights, old flues and wiring, leaving the roof safe as well as well-insulated.
Heat rises, and in an under-insulated home it pours out through the ceiling in winter and floods in from a baking roof cavity in summer. The ceiling is the single biggest thermal weak point in most Melbourne homes — which is why it's the first place to fix and the one that returns the most comfort for the money.
A properly insulated ceiling isn't just a layer of batts thrown in. It's a continuous, sealed R6.0 blanket that reaches the eaves, wraps around every penetration and leaves no cold gaps — so your heating and cooling stop fighting a constant loss and the whole house holds a steadier temperature.
Recent insulation work across Melbourne — the same certified R6.0 standard we bring to every Glen Iris job.
| Ceiling insulation standard | Cheap installers | FreshDuct |
|---|---|---|
| Roof inspection | Quoted blind or over the phone | We get into the roof, measure the existing R-value and check access first |
| Coverage | Batts dropped in the middle, eaves left bare | Hand-fitted right to the eaves and sealed around every gap |
| R-value | Whatever is cheapest | A full R6.0 ceiling standard with certified thermal batts |
| Old insulation | Left in place or covered over | Removed and the cavity vacuumed clean where it is damaged or contaminated |
| Clearances | Ignored around downlights & flues | Correct clearances kept around downlights, flues and wiring |
| Proof of work | None | Before & after photos of your finished roof |
A continuous, sealed R6.0 layer across your whole ceiling — no cold gaps left behind.
We get into the roof space, measure the existing insulation and R-value, and check access, wiring and any moisture.
You get a fixed written quote — including removal of old or damaged insulation if the cavity needs clearing first.
Certified installers hand-fit certified batts end to end — right to the eaves, sealed around every gap — for an even, continuous layer.
We confirm full coverage and correct clearances, then hand over before/after photos of the finished roof.
A properly insulated ceiling cuts the heat lost in winter and gained in summer, so your heating and cooling run less.
Rooms stop swinging hot and cold — the whole home holds a steadier, more comfortable temperature.
We install to a full R6.0 ceiling standard with certified thermal batts, not whatever happens to be cheapest.
Certified R6.0 batts, old-insulation removal and top-ups in the roof space.
The full FreshDuct home insulation range across Melbourne.
Batts between the floor joists to stop cold floors and downward heat loss.
Retrofit cavity fill and new-wall insulation for a continuous thermal barrier.
Full roof, wall and floor insulation for new builds to NCC / BASIX.
Industrial vacuum removal of old, damaged or contaminated insulation.
We serve Glen Iris and the inner south-east — Malvern, Camberwell, Ashburton, Hawthorn East and across to Chadstone. Free, no-obligation quotes.
We insulate homes right across Glen Iris and the surrounding suburbs.
Yes. Hipped period roofs with gables and valleys take careful hand-fitting to reach every corner and eave, which is where a token job leaves gaps. We assess the whole roof on inspection and quote for continuous, edge-to-edge coverage.
Often yes. Original insulation in these century-old homes has usually settled thin and may have bare patches from past renovation. We measure the real depth and either top it up or, if degraded, remove and replace with fresh R6.0 batts.
It depends on your ceiling area, the R-value and whether old insulation needs removing first. That's why we inspect the roof and give a fixed written quote rather than a phone estimate — no call-out fee and no obligation.
If the existing insulation is damaged, damp or contaminated, yes — we vacuum it out with industrial equipment and leave the cavity clean and inspectable before installing new R6.0 batts. If it's clean and dry, we can top up over it.
Most single-storey homes are done in a day. Larger or two-storey homes, or jobs that need old insulation removed first, can take a little longer — we confirm the timeframe with your quote.
Book a free roof inspection and fixed written quote for your Glen Iris home — no call-out fee, no obligation.
No call-out fee, no obligation.
