🌞 Winter Specials! | 🌡️ AC, Heater & Split System Cleaning | 💧 Evap Cooler Service | 🔍 HVAC Inspections | 📞 Call Today for a Free Quote!
🌞 Winter Specials! | 🌡️ AC, Heater & Split | 💧 Evap Cooler | 🔍 HVAC Check | 📞Free Quote!
Cheltenham is a bayside south-eastern suburb of mostly post-war brick-veneer and weatherboard homes, with some interwar houses and an accelerating wave of townhouse and knock-down-rebuild development. FreshDuct installs certified R6.0 ceiling insulation across Cheltenham.
Three details and we'll call you back — usually the same day.
Cheltenham is a bayside south-eastern suburb of mostly post-war brick-veneer and weatherboard homes, with some interwar houses and an accelerating wave of townhouse and knock-down-rebuild development. The older homes were built with little ceiling insulation, and being close to the bay they face both strong summer sun and cooler, damper coastal air in winter.
For the many original post-war homes still in Cheltenham, a full R6.0 ceiling top-up is a straightforward, high-value upgrade — the roofs are accessible and the gains are immediate. On townhouse developments we make sure the ceiling coverage is complete and even, which is an area often skimped during fast builds.
Near-bay homes cop strong summer sun and cool, damp winters. A continuous ceiling layer helps with both heat and cold.
Original 1950s-70s homes here typically have little insulation. A proper top-up delivers a big comfort and cost improvement.
Recent townhouse builds sometimes have patchy ceiling coverage. We check for and fix gaps so the whole ceiling performs.
Heat rises, and in an under-insulated home it pours out through the ceiling in winter and floods in from a baking roof cavity in summer. The ceiling is the single biggest thermal weak point in most Melbourne homes — which is why it's the first place to fix and the one that returns the most comfort for the money.
A properly insulated ceiling isn't just a layer of batts thrown in. It's a continuous, sealed R6.0 blanket that reaches the eaves, wraps around every penetration and leaves no cold gaps — so your heating and cooling stop fighting a constant loss and the whole house holds a steadier temperature.
Recent insulation work across Melbourne — the same certified R6.0 standard we bring to every Cheltenham job.
| Ceiling insulation standard | Cheap installers | FreshDuct |
|---|---|---|
| Roof inspection | Quoted blind or over the phone | We get into the roof, measure the existing R-value and check access first |
| Coverage | Batts dropped in the middle, eaves left bare | Hand-fitted right to the eaves and sealed around every gap |
| R-value | Whatever is cheapest | A full R6.0 ceiling standard with certified thermal batts |
| Old insulation | Left in place or covered over | Removed and the cavity vacuumed clean where it is damaged or contaminated |
| Clearances | Ignored around downlights & flues | Correct clearances kept around downlights, flues and wiring |
| Proof of work | None | Before & after photos of your finished roof |
A continuous, sealed R6.0 layer across your whole ceiling — no cold gaps left behind.
We get into the roof space, measure the existing insulation and R-value, and check access, wiring and any moisture.
You get a fixed written quote — including removal of old or damaged insulation if the cavity needs clearing first.
Certified installers hand-fit certified batts end to end — right to the eaves, sealed around every gap — for an even, continuous layer.
We confirm full coverage and correct clearances, then hand over before/after photos of the finished roof.
A properly insulated ceiling cuts the heat lost in winter and gained in summer, so your heating and cooling run less.
Rooms stop swinging hot and cold — the whole home holds a steadier, more comfortable temperature.
We install to a full R6.0 ceiling standard with certified thermal batts, not whatever happens to be cheapest.
Certified R6.0 batts, old-insulation removal and top-ups in the roof space.
The full FreshDuct home insulation range across Melbourne.
Batts between the floor joists to stop cold floors and downward heat loss.
Retrofit cavity fill and new-wall insulation for a continuous thermal barrier.
Full roof, wall and floor insulation for new builds to NCC / BASIX.
Industrial vacuum removal of old, damaged or contaminated insulation.
We serve Cheltenham and the bayside south-east — Mentone, Moorabbin, Highett and across to Brighton. Free, no-obligation quotes.
We insulate homes right across Cheltenham and the surrounding suburbs.
The principle is the same — the ceiling is where most heat is gained and lost — but coastal homes benefit especially, because they face strong summer sun and cool, damp winters. A sealed, even R6.0 layer helps the house hold a steady temperature against both.
Yes. Fast townhouse builds sometimes leave patchy or thin ceiling coverage. It's worth confirming the whole ceiling is properly and evenly insulated, and we can top up any gaps.
It depends on your ceiling area, the R-value and whether old insulation needs removing first. That's why we inspect the roof and give a fixed written quote rather than a phone estimate — no call-out fee and no obligation.
If the existing insulation is damaged, damp or contaminated, yes — we vacuum it out with industrial equipment and leave the cavity clean and inspectable before installing new R6.0 batts. If it's clean and dry, we can top up over it.
Most single-storey homes are done in a day. Larger or two-storey homes, or jobs that need old insulation removed first, can take a little longer — we confirm the timeframe with your quote.
Book a free roof inspection and fixed written quote for your Cheltenham home — no call-out fee, no obligation.
No call-out fee, no obligation.
