🌞 Winter Specials! | 🌡️ AC, Heater & Split System Cleaning | 💧 Evap Cooler Service | 🔍 HVAC Inspections | 📞 Call Today for a Free Quote!
🌞 Winter Specials! | 🌡️ AC, Heater & Split | 💧 Evap Cooler | 🔍 HVAC Check | 📞Free Quote!
Kew is one of Melbourne's most established inner-eastern suburbs, full of grand Victorian, Edwardian and Federation homes, mansions and California bungalows, much of it under heritage overlay. FreshDuct installs certified R6.0 ceiling insulation across Kew.
Three details and we'll call you back — usually the same day.
Kew is one of Melbourne's most established inner-eastern suburbs, full of grand Victorian, Edwardian and Federation homes, mansions and California bungalows, much of it under heritage overlay. These period homes have large, high roof cavities ideal for a deep insulation layer — but the insulation actually in them is usually original: deteriorated, settled, or absent, and often sitting above the kind of decorative plaster ceilings that demand a careful hand.
We've done real work in Kew roofs, and the before/after photos below are from local jobs — deteriorated old batts removed, the cavity vacuumed clean and inspectable, and precision-fit R6.0 batts installed end to end. On a big Kew period roof the value is in the detail: reaching the eaves, sealing around hips and valleys, protecting the ceiling below, and keeping clearances correct around vintage wiring.
Much of Kew is heritage-protected. Insulation is internal, so it upgrades performance without touching the protected facade.
Period homes often have old, deteriorated batts better removed first — our local photos show exactly that before we re-insulate.
Grand homes have decorative plaster and vintage wiring. We work methodically, protect the ceiling and keep clearances correct.
Heat rises, and in an under-insulated home it pours out through the ceiling in winter and floods in from a baking roof cavity in summer. The ceiling is the single biggest thermal weak point in most Melbourne homes — which is why it's the first place to fix and the one that returns the most comfort for the money.
A properly insulated ceiling isn't just a layer of batts thrown in. It's a continuous, sealed R6.0 blanket that reaches the eaves, wraps around every penetration and leaves no cold gaps — so your heating and cooling stop fighting a constant loss and the whole house holds a steadier temperature.
Actual before and after photos from a Kew roof — old insulation removed, the cavity vacuumed clean, and new R6.0 batts installed.
| Ceiling insulation standard | Cheap installers | FreshDuct |
|---|---|---|
| Roof inspection | Quoted blind or over the phone | We get into the roof, measure the existing R-value and check access first |
| Coverage | Batts dropped in the middle, eaves left bare | Hand-fitted right to the eaves and sealed around every gap |
| R-value | Whatever is cheapest | A full R6.0 ceiling standard with certified thermal batts |
| Old insulation | Left in place or covered over | Removed and the cavity vacuumed clean where it is damaged or contaminated |
| Clearances | Ignored around downlights & flues | Correct clearances kept around downlights, flues and wiring |
| Proof of work | None | Before & after photos of your finished roof |
A continuous, sealed R6.0 layer across your whole ceiling — no cold gaps left behind.
We get into the roof space, measure the existing insulation and R-value, and check access, wiring and any moisture.
You get a fixed written quote — including removal of old or damaged insulation if the cavity needs clearing first.
Certified installers hand-fit certified batts end to end — right to the eaves, sealed around every gap — for an even, continuous layer.
We confirm full coverage and correct clearances, then hand over before/after photos of the finished roof.
A properly insulated ceiling cuts the heat lost in winter and gained in summer, so your heating and cooling run less.
Rooms stop swinging hot and cold — the whole home holds a steadier, more comfortable temperature.
We install to a full R6.0 ceiling standard with certified thermal batts, not whatever happens to be cheapest.
Certified R6.0 batts, old-insulation removal and top-ups in the roof space.
The full FreshDuct home insulation range across Melbourne.
Batts between the floor joists to stop cold floors and downward heat loss.
Retrofit cavity fill and new-wall insulation for a continuous thermal barrier.
Full roof, wall and floor insulation for new builds to NCC / BASIX.
Industrial vacuum removal of old, damaged or contaminated insulation.
We work across Kew, Kew East and the inner east around it — Hawthorn, Camberwell, Balwyn and across to Abbotsford. This is core territory for us, so quotes are quick.
We insulate homes right across Kew and the surrounding suburbs.
Yes — they're from real FreshDuct jobs in Kew period homes: deteriorated old insulation removed, the roof space vacuumed clean, and new R6 batts precision-fitted. We use photos of our own local work rather than stock images.
Yes, carefully. Kew's period homes often have ornate plaster ceilings and vintage wiring. We spread our weight properly, work methodically across what are often large roofs, protect the ceiling below and keep clearances correct — and remove deteriorated old insulation first where needed, as our local photos show.
It depends on your ceiling area, the R-value and whether old insulation needs removing first. That's why we inspect the roof and give a fixed written quote rather than a phone estimate — no call-out fee and no obligation.
If the existing insulation is damaged, damp or contaminated, yes — we vacuum it out with industrial equipment and leave the cavity clean and inspectable before installing new R6.0 batts. If it's clean and dry, we can top up over it.
Most single-storey homes are done in a day. Larger or two-storey homes, or jobs that need old insulation removed first, can take a little longer — we confirm the timeframe with your quote.
Book a free roof inspection and fixed written quote for your Kew home — no call-out fee, no obligation.
No call-out fee, no obligation.
