Mentone is a bayside south-eastern suburb of interwar Californian bungalows, Edwardian and Federation homes and post-war brick, set on gentle streets running down to the beach and cliffs. FreshDuct installs certified R6.0 ceiling insulation across Mentone.
Three details and we'll call you back — usually the same day.


















Mentone is a bayside south-eastern suburb of interwar Californian bungalows, Edwardian and Federation homes and post-war brick, set on gentle streets running down to the beach and cliffs. Its established housing is a comfortable mix of period character and mid-century solidity, sitting close to the salt air and onshore weather of the bay's south-eastern shore.
The interwar bungalows and period homes here typically have hipped roofs carrying settled, decades-old insulation or bare patches, where hand-fitting to the eaves and corners is what keeps coverage continuous. The post-war brick homes are simpler and quicker to upgrade. The coastal setting adds moisture and draughts to the picture. A clean, sealed R6.0 layer across the whole ceiling steadies these homes through the seasons and shuts out the wind-driven draughts that an older bayside roof lets slip through.
Mentone's older homes often carry thin, settled insulation past its life. We measure the real depth and top up or replace to restore a full R6.0.
Near the beach, roofs face salt air and wind-driven weather. A well-sealed ceiling layer steadies temperature and shuts out draughts; we check the cavity's condition first.
Bungalows and period homes here have hipped roofs with eaves that need careful hand-fitting. We seal right to the perimeter so no cold gaps are left.
Heat rises, and in an under-insulated home it pours out through the ceiling in winter and floods in from a baking roof cavity in summer. The ceiling is the single biggest thermal weak point in most Melbourne homes — which is why it's the first place to fix and the one that returns the most comfort for the money.
A properly insulated ceiling isn't just a layer of batts thrown in. It's a continuous, sealed R6.0 blanket that reaches the eaves, wraps around every penetration and leaves no cold gaps — so your heating and cooling stop fighting a constant loss and the whole house holds a steadier temperature.
Recent insulation work across Melbourne — the same certified R6.0 standard we bring to every Mentone job.






| Ceiling insulation standard | Cheap installers | FreshDuct |
|---|---|---|
| Roof inspection | Quoted blind or over the phone | We get into the roof, measure the existing R-value and check access first |
| Coverage | Batts dropped in the middle, eaves left bare | Hand-fitted right to the eaves and sealed around every gap |
| R-value | Whatever is cheapest | A full R6.0 ceiling standard with certified thermal batts |
| Old insulation | Left in place or covered over | Removed and the cavity vacuumed clean where it is damaged or contaminated |
| Clearances | Ignored around downlights & flues | Correct clearances kept around downlights, flues and wiring |
| Proof of work | None | Before & after photos of your finished roof |
A continuous, sealed R6.0 layer across your whole ceiling — no cold gaps left behind.
We get into the roof space, measure the existing insulation and R-value, and check access, wiring and any moisture.
You get a fixed written quote — including removal of old or damaged insulation if the cavity needs clearing first.
Certified installers hand-fit certified batts end to end — right to the eaves, sealed around every gap — for an even, continuous layer.
We confirm full coverage and correct clearances, then hand over before/after photos of the finished roof.
A properly insulated ceiling cuts the heat lost in winter and gained in summer, so your heating and cooling run less.
Rooms stop swinging hot and cold — the whole home holds a steadier, more comfortable temperature.
We install to a full R6.0 ceiling standard with certified thermal batts, not whatever happens to be cheapest.
Certified R6.0 batts, old-insulation removal and top-ups in the roof space.
The full FreshDuct home insulation range across Melbourne.
Batts between the floor joists to stop cold floors and downward heat loss.
Retrofit cavity fill and new-wall insulation for a continuous thermal barrier.
Full roof, wall and floor insulation for new builds to NCC / BASIX.
Industrial vacuum removal of old, damaged or contaminated insulation.
We serve Mentone and the bayside south-east — Cheltenham, Parkdale, Mordialloc, Moorabbin and across to Sandringham. Free, no-obligation quotes.
We insulate homes right across Mentone and the surrounding suburbs.
Two things: the hipped roof needs careful hand-fitting to reach every eave and corner, and being close to the bay, we check the cavity for salt-air moisture and any corroded fittings. We assess both on a free inspection and quote for continuous, sealed coverage.
Only if it's degraded, damp or contaminated. If it's clean and dry we top up over it to reach a full R6.0. If it's past its life we vacuum it out and leave the cavity clean before installing fresh batts. We confirm which on inspection.
It depends on your ceiling area, the R-value and whether old insulation needs removing first. That's why we inspect the roof and give a fixed written quote rather than a phone estimate — no call-out fee and no obligation.
If the existing insulation is damaged, damp or contaminated, yes — we vacuum it out with industrial equipment and leave the cavity clean and inspectable before installing new R6.0 batts. If it's clean and dry, we can top up over it.
Most single-storey homes are done in a day. Larger or two-storey homes, or jobs that need old insulation removed first, can take a little longer — we confirm the timeframe with your quote.
Old halogen and non-IC fittings leave gaps in the insulation and rule the ceiling out of the Victorian insulation discount. We fit sealed IC-4 LEDs, then insulate edge to edge.
Book a free roof inspection and fixed written quote for your Mentone home — no call-out fee, no obligation.
No call-out fee, no obligation.