★★★★★600+ 5-star reviewsNo call-out feeBook online
Spring Specials
Split system service before summerEvap cooler serviceDuct cleaning for hay fever seasonHVAC inspections📞 Free quote →
Get a free quote →
Beware of impostors using the FreshDuctour name. Read more

Some people are using the FreshDuct name and pretending to be us to scam customers. Please don't fall for it. We are the only genuine FreshDuct, operating in Melbourne, Sydney, Adelaide and Perth. Only deal with us through freshduct.com.au, or call us directly on 04 3191 8137 or 0480 004 051. We are taking legal action against these impostors. Thank you.

FreshDuct Explains

Bathroom exhaust fans explained

The short answer

Bathroom exhaust fans clog with dust and lint, which cuts airflow and leaves steam in the room. Water dripping from a fan is usually condensation from a fan venting into the roof, and mould with the fan on usually means it isn't extracting. Run the fan during every shower and 15 to 20 minutes after, and make sure it vents outside.

  • Bathroom + laundry exhaust fans
  • 2:44
  • Published 22 Nov 2026

7 days a week. No call-out fee, and you pay after the job.

Key points

  • Dust and lint on the blades and grille cut airflow and make the fan noisy.
  • Dripping is usually condensation, not a roof leak: the fan vents into the roof or the duct is uninsulated.
  • Switching the fan off too early is the biggest cause of mould in wet areas.
  • Hum with no spin means the motor can't turn; silence means no power. Grinding or squealing means worn bearings.
  • A run-on timer suits people who remember the fan; a humidity sensor suits rooms where it gets forgotten.

Chapters

  1. What builds up in a bathroom exhaust fan
  2. Why your exhaust fan drips water
  3. Mould on the ceiling with the fan on?
  4. Bathroom exhaust fan not working
  5. What exhaust fan noises mean
  6. Exhaust fan timers and humidity sensors

Questions this video answers

What builds up in a bathroom exhaust fan?

Dust and lint coat the fan blades and grille, cutting the airflow. A clogged fan gets noisy and steam hangs around for longer.

Why is my bathroom exhaust fan dripping water?

It is usually condensation, not a roof leak. If the fan vents into the roof cavity, or the duct runs through a cold roof without insulation, moist air turns to water and drips back down. The fix is correct ducting, vented outside and insulated.

Why is there mould on my ceiling with the fan on?

A running fan isn't always extracting. If it dumps moist air into the roof or is too weak for the room, the moisture stays. Run it during every shower and for 15 to 20 minutes after.

Why has my bathroom fan stopped working?

A hum with no spin means the motor cannot turn, and silence means no power is reaching it. If it runs but the room stays steamy, the duct may be crushed, kinked or not vented outside.

What do exhaust fan noises mean?

Rattling usually means a loose cover or grille. A droning hum with the blades turning often means dust build-up, which cleaning can fix. Grinding or squealing means worn motor bearings, and the fan needs replacing.

Should I use a timer or humidity sensor on my exhaust fan?

A run-on timer suits people who remember to use the fan; a humidity sensor suits rooms where it gets forgotten, switching on as humidity rises and off when it drops.

Transcript

What builds up in a bathroom exhaust fan

When did anyone last clean your bathroom exhaust fan? FreshDuct shows what builds up inside. Dust and lint coat the fan blades and the grille, and that cuts the airflow. A clogged fan gets noisy, and the steam hangs around the room for longer. You can clean the cover yourself. For fans that are hard to reach or badly clogged, call a pro. Dryer vent and exhaust fan cleaning start from $150, with no call-out fee.

Why your exhaust fan drips water

Water dripping from your bathroom exhaust fan? FreshDuct explains why. It's usually condensation, not a roof leak. If the fan vents into the roof cavity, the moist air hits cold surfaces, turns to water and drips back down. A duct running through a cold roof without insulation can do the same. The fix is correct ducting: vented outside, insulated where it's cold, and run so the water drains away.

Mould on the ceiling with the fan on?

Mould on your bathroom ceiling, even with the fan on? FreshDuct explains why. A fan that's running isn't always a fan that's extracting. If it dumps the moist air into the roof, or it's too weak for the room, the moisture stays. Run it during every shower and for fifteen to twenty minutes after. A timer makes it automatic. And make sure it actually vents outside. That's the first thing to check.

Bathroom exhaust fan not working

Bathroom fan stopped working? FreshDuct explains what to check. A hum with no spin means the motor cannot turn. Silence means no power is reaching it. Runs but leaves the room steamy? The duct may be crushed, kinked, or not vented outside. Safe to do yourself: switch it off, remove the cover, and clean the dust. Never wet the motor. Still faulty after cleaning, or humming without spinning? Have a licensed technician check it.

What exhaust fan noises mean

Noisy exhaust fan? FreshDuct explains what each sound means. Rattling means something is loose, most often the cover or grille. A droning hum with the blades turning often means dust build-up. Cleaning can fix it. Loud hum but no spin? Switch it off, because a stalled motor overheats, and have the fan replaced. Grinding or squealing means worn motor bearings. Cleaning cannot fix that, so have the whole fan replaced.

Exhaust fan timers and humidity sensors

Bathroom fan stopping too soon? FreshDuct explains timers and sensors. The biggest cause of mould in wet areas is switching the fan off too early. A run-on timer keeps the fan running for a set time after you flick the switch off. A humidity sensor switches the fan on as humidity rises, then off when it drops back. A timer suits people who remember the fan. A sensor suits rooms where it gets forgotten. No call-out fee, and you pay after the job.

Call FreshDuct on 04 3191 8137.