🌞 Winter Specials! | 🌡️ AC, Heater & Split System Cleaning | 💧 Evap Cooler Service | 🔍 HVAC Inspections | 📞 Call Today for a Free Quote!
🌞 Winter Specials! | 🌡️ AC, Heater & Split | 💧 Evap Cooler | 🔍 HVAC Check | 📞Free Quote!
Brunswick’s Victorian terraces and warehouse conversions squeeze their condensers into tiny courtyards and side returns, where poor airflow makes them overheat and cut out on error. Add a heavy renter mix and FreshDuct sorts the fault and the access — all major brands, 7 days.
A split that trips out on hot afternoons is often an outdoor unit starved of airflow, not a dying compressor.
Brunswick runs from tight Victorian workers’ terraces to converted warehouses and a heavy mix of rentals and share-houses. Blocks are narrow and outdoor space is scarce, so the condenser for a split is usually wedged into a small paved courtyard, a side return or up against a boundary wall — wherever it could physically go.
Boxed in like that, the outdoor unit cannot shed heat the way it needs to. On a hot Brunswick afternoon head pressure builds, the system protects itself and shuts down on an error, and it looks for all the world like a major failure. Often it is not: it is an airflow problem stacked on a tired part. We diagnose the real cause and, where the mount is choking the unit, we say so.
The faults we see most on Brunswick split systems — based on the local homes, install styles and conditions.
A condenser starved of airflow in a tight courtyard overheats and shuts down on a high-pressure fault. We read the code, check clearances and test the condenser so we fix the actual cause, not just clear the error.
A split that stops cooling or leaks inside is often a blocked drain tripping a safety switch, not a gas fault. We clear the drain line and confirm the float switch and tray are working before looking further.
With Brunswick’s high renter mix we regularly deal with agents and tenants, arranging access and reporting back clearly — and we handle warranty servicing so a newer unit’s repair is done by the book.
Real photos from FreshDuct split-system diagnostics, refrigerant work and repairs. We document every job with clear before-and-after photos.
One local team for the whole system — from a not-cooling diagnosis and re-gas to parts, board repairs and an annual tune. Need a hygiene clean instead? We do that too.
Not cooling or heating? We fault-find the whole system — refrigerant, electrics, sensors and board — and tell you plainly what it needs.
View service →
Low on refrigerant means a leak. We pressure-test, find and repair the leak, then re-gas to the correct charge — not just a top-up.
View service →
A full service and tune — pressures, electrics, capacitor, fan and drain checked so the system runs efficiently and reliably.
View service →
Capacitors, fan motors, PCBs, sensors and contactors sourced and replaced for all major brands, with a clear quote first.
View service →
Need a hygiene clean instead? Deep coil and barrel-fan cleaning, mould treatment and sanitising for cleaner, healthier air.
View service →
Ducted, evaporative and multi-head systems too — one local team for heating, cooling and ventilation across Melbourne.
View service →
When a Brunswick split keeps cutting out we start by separating an airflow problem from a hardware one. We read the error, then run the condenser and check its clearances, the fan motor, the capacitor and refrigerant pressures, because a unit boxed into a courtyard can trip on high pressure even when the parts themselves are sound.
If the mount is choking the outdoor unit we tell you what it needs to breathe; if the fault is a tired capacitor, a struggling fan motor, a blocked drain or a leak, we repair that directly and re-gas where needed. Either way we run the system through a full cycle afterwards so it holds up on the next hot day, not just in the cool of the visit.
FreshDuct repairs and services split systems right across Brunswick, Brunswick East and Brunswick West, and we are often working nearby in Coburg, Northcote, Carlton and Fitzroy, so a Brunswick call fits neatly into the day.
From the terraces off Sydney Road to the warehouse conversions near Jewell and Anstey, we coordinate access with tenants and agents where needed and will prioritise a system that has dropped out in the heat.
A methodical diagnosis and repair — we find the actual fault, quote it clearly, and fix it right the first time.
We run the system, read any error codes and test the electrics, sensors and refrigerant pressures to find the real fault, not just the symptom.
If it is low on gas we pressure-test to find the leak — a re-gas without fixing the leak just fails again in a season.
You get a clear, itemised quote before any part is fitted — capacitor, fan motor, PCB, sensor or a re-gas, with honest advice on repair-versus-replace.
We fit the part, repair the leak and re-gas to the manufacturer charge, then re-test cooling and heating output.
Electrics, contactor, fan, drain and airflow checked and tuned so the system runs efficiently and reliably.
A clear report with photos and honest advice on whether to keep servicing or plan a replacement.
Verified 5-star reviews from across FreshDuct’s split-system, heating and cooling services.
“Our split stopped cooling in a heatwave. FreshDuct found a leak on the outdoor unit, repaired it and re-gassed it — icy cold again the same day.”
Verified
“Bedroom head was throwing an error code and shutting down. They diagnosed a faulty PCB, quoted it and had it running the next visit.”
Verified
“Honest team — the outdoor fan motor had failed and they replaced it rather than pushing a whole new system. Saved me a fortune.”
Verified
“Great communication. They tested the capacitor and pressures, showed me the readings and explained exactly what was wrong.”
Verified
“Multi-head system, one room never cold. They tracked it to a blocked drain and low charge on that circuit and sorted both.”
Verified
“Quick, professional and tidy. The report and photos showed exactly what they checked and fixed on the unit.”
Verified
We cover Brunswick and the surrounding suburbs. Explore nearby areas and related FreshDuct services.
Not necessarily. A condenser squeezed into a tight courtyard often cannot shed heat on a hot day, so pressures climb and the unit trips to protect itself — which can look like a failing compressor but is really an airflow and heat problem. We check the clearances, fan and charge before condemning anything, because the fix is frequently far cheaper than a new unit.
Yes. We are used to Brunswick’s rental mix, so we coordinate a time directly with the tenant, carry out the diagnosis and repair, and report back to you on what was found and done. If the unit is still under warranty we handle the servicing correctly so the cover is not put at risk.
Yes. FreshDuct diagnoses and repairs split systems across Brunswick and the surrounding inner north, 7 days a week — not-cooling and not-heating faults, re-gas and leak detection, error codes and parts for all major brands. Call 04 3191 8137 or request a free quote.
It is usually one of a few things: low refrigerant from a slow leak, a failed capacitor or fan motor on the outdoor unit, a blocked filter or coil, or a fault on the control board. We diagnose the actual cause rather than guessing, and quote the repair before we start.
We do, but a split system is a sealed circuit — if it is low on gas it has a leak. A top-up alone just leaks out again within a season, so we pressure-test to find the leak, repair it, then re-gas to the correct manufacturer charge.
It depends on the age, the brand and the fault. A capacitor, fan motor or sensor on an otherwise sound unit is well worth repairing; a failed compressor or a leaking coil on a 12-to-15-year-old system often is not. We give you honest, itemised advice either way.
Not-cooling & not-heating diagnostics, gas re-gas and leak detection, error-code faults, capacitor, fan-motor and board repairs, and an annual tune — a clean, documented service with photo proof. Available 7 days.
Tell us the fault and your split system — we respond fast, 7 days.
