🌞 Winter Specials! | 🌡️ AC, Heater & Split System Cleaning | 💧 Evap Cooler Service | 🔍 HVAC Inspections | 📞 Call Today for a Free Quote!
🌞 Winter Specials! | 🌡️ AC, Heater & Split | 💧 Evap Cooler | 🔍 HVAC Check | 📞Free Quote!
Chadstone’s post-war brick homes often run open fires and wood heaters. FreshDuct sweeps, inspects and repairs their chimneys cleanly, with photo proof.
Post-war fireplace or wood heater? An annual sweep and safety check keeps it running well.
Chadstone grew in the post-war decades, and its housing reflects it — solid cream and red-brick homes from the 1950s and 60s, many still with their original open fireplaces or a wood heater added along the way. These are practical, well-built houses, and their chimneys have done steady service for half a century or more.
The typical Chadstone chimney is a straightforward brick flue, but age still tells. Decades of wood-burning build creosote; the mortar on the exposed stack weathers; and mid-century caps and flashing corrode or work loose. None of it is exotic, but it all adds up to a flue that benefits from a regular sweep and an occasional proper inspection.
FreshDuct sweeps, inspects and repairs Chadstone chimneys cleanly and without fuss — clearing creosote, checking caps and flashing, and repointing where the mortar has gone — with before and after photos on every job.
The things we look at first on a Chadstone chimney — based on the local housing and conditions.
Many Chadstone homes have burned wood for decades, building creosote in the flue. We sweep and camera it and advise whether a standard sweep or a deep clean is the right call.
Mid-century caps and flashing corrode and loosen over time. We check and replace them so rain and birds stay out and the flue keeps drawing well.
Fifty-plus years of weather erode mortar on a post-war stack. We repoint worn joints so the chimney stays sound and sheds water.
Real photos from FreshDuct chimney jobs. We document every job we do with before and after photos.
One local team for the whole chimney — from a routine sweep to inspections, repairs and caps.
Contained, mess-free sweep for open fires and wood heaters.
View service →
Visual, camera & drone checks with a full photo report.
View service →
For heavy, baked-on or glazed creosote a sweep can’t shift.
View service →
Leaks, cracks, flashing and masonry put right, with photos.
View service →
Cracked, unlined or failing flues repaired or relined.
View service →
Keep rain, birds and embers out and improve draught.
View service →
Every part of the chimney, handled by the one local team. Here is what each job involves on a typical Chadstone chimney.
Swept top to bottom with the register plate lifted so the old chimney void is cleaned too, not just the pipe. Everything sealed back up before we leave.
Rotary cleaned through the appliance flue and the masonry above, with the register plate lifted so nothing is left behind it.
The key question on a retrofit is whether the heater and flue were correctly installed into the old fireplace. We camera the flue and check the register plate, clearances and surrounding masonry.
Both the appliance flue and the surrounding masonry void cleared and swept, then the top of the stack capped to close it off.
On a retrofit the old smoke chamber sits sealed above the new heater and quietly accumulates residue. We open it up, clean it and confirm the register plate is doing its job.
Mid-century concrete and terracotta caps crack as the mortar bed below them lets go. We repair the cap and rebed it so the top of the stack sheds water again.
If the top of your stack is a thin skim of cement level with the brickwork, it is a wash rather than a crown and it will be leaking.
Smoke or smell escaping into the room around a retrofitted heater almost always traces back to that masonry junction.
Fitting a new flue into a post-war home often means running an insulated liner up the existing masonry chimney. We size it to the appliance and seal the top and register plate.
Installed as an insulated liner sealed at the register plate and the crown, so flue gas stays inside the liner and the old flue stays dry.
A chimney breast that feels cold and damp to the touch inside usually has an open flue above it collecting rain.
Post-war stacks were built with harder cement mortars that crack rather than erode, often right at the roofline. We cut the cracked joints out and repoint the affected courses.
Either repaired to seal at the throat or replaced with a top-sealing damper at the crown, whichever suits the retrofit better.
If the join between your chimney and roof is a wedge of mortar rather than metal, it is a fillet and it will be cracked.
Post-war chimneys used softer commons behind a rendered or face-brick finish, and they fret badly once exposed. We replace the affected brickwork and make the top weathertight.
Smoke problems after a retrofit are usually a sizing or sealing issue where the heater meets the old chimney. We find the leak or restriction and correct it.
Rendered post-war stacks crack and then hold water behind the render. We repair the render first, then waterproof so the problem does not simply return.
Post-war stacks often need the render stripped, brickwork made good and the top rebuilt. We restore the chimney to a state where it can be used and maintained again.
Once a post-war stack has lost significant brick, rebuilding the section above the roof is usually better value than ongoing patching.
On a retrofit there are two things to maintain, the appliance and the old chimney around it, and the second is usually the one forgotten.
An older gas conversion that has never been checked is worth looking at, since many were installed without any flue modification.
A post-war Chadstone chimney is a workhorse that has earned a regular service. We sweep and camera the flue for the creosote a long history of fires leaves behind, then check the cap, flashing and mortar.
Anything that needs more than a clean — a corroded cap, worn flashing or eroded mortar — we flag with photos and put right, so the chimney stays safe and dry.
FreshDuct services Chadstone and the south-east 7 days a week. We are regularly working nearby Oakleigh, Malvern, Glen Waverley and Clayton, so Chadstone and its borders are part of our normal run.
From the homes around the shopping centre to the streets toward Ashwood and Malvern East, we can usually offer a prompt time and prioritise any chimney where smoke is entering the home.
A safe, documented, end-to-end service — every job, every suburb.
Visual, camera or drone inspection of the chimney and flue.
We pinpoint the real cause and explain it clearly.
Only what is needed, done properly and safely.
We confirm clearances, draw and a safe result.
Before & after photos so you see the result.
Site left clean, with honest advice.
Verified 5-star reviews from across FreshDuct’s duct, heating, cooling and chimney services.
“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
“Highly impressed with the professionalism and efficiency. On time, and no mess left behind.”
Verified
“Exceeded my expectations. Knowledgeable, meticulous and respectful of our home.”
Verified
“So glad I chose FreshDuct. Knowledgeable team and the whole process was smooth from start to finish.”
Verified
“Quick, efficient and professional — we could immediately feel the difference.”
Verified
“The technician arrived on time and was incredibly thorough — the difference at home is obvious.”
Verified
We cover Chadstone and the surrounding suburbs. Explore nearby areas and related FreshDuct services.
Yes. We sweep and inspect wood-heater flues as well as open-fire chimneys, clearing creosote and checking the flue and cap. If a heater’s flue is glazed or heavily built up, we advise on a deep clean.
A standard sweep starts from $180 and a safety inspection from $99, then quoted to your chimney and roof access. You get clear pricing up front — call 04 3191 8137 for a free quote.
Yes. FreshDuct provides chimney sweeping, safety inspections, deep cleaning, repairs, caps and cowls across Chadstone and the surrounding south-east, 7 days a week. Call 04 3191 8137 or request a free quote.
A standard chimney sweep starts from $180 and a chimney safety inspection from $99, then quoted to your chimney, its condition and roof access. You get clear pricing up front — call 04 3191 8137.
We service Chadstone and nearby suburbs 7 days a week and prioritise blockages and smoke problems where a fire can’t be used safely. Call 04 3191 8137 for the soonest availability.
Yes. Every FreshDuct chimney job in Chadstone comes with before and after photos and honest, plain-English advice — so you can see exactly what was done and why.
Sweeping, inspections, repairs and caps — a clean, documented job with photo proof. Available 7 days.
Tell us about your chimney — we respond fast, 7 days.
