“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
Melton chimney repairs run from the weathered mortar and missing caps on old town-centre stacks to flue joints and flashing on the heaters that carry semi-rural homes through winter. FreshDuct inspects with a camera and quotes the fault, not the chimney.
Melton town chimney losing mortar on the weather side? Repointing now is a fraction of a rebuild later.
The older brick and weatherboard homes near Melton's town centre carry stacks that have stood for generations, and they show it in the usual places: mortar joints washed hollow on the weather side, bricks with their faces gone, a crown cracked through and a cap that came off some winter and was never replaced. Water gets in at every one of those points, and on a chimney that has been uncapped for years it has been getting in for a long time.
The newer estate homes and the heaters on the semi-rural blocks fail differently. The flue is a steel system, and the weak spots are the flashing where it leaves the roof and the joints where the sections meet above the ceiling. A perished flashing kit or loose storm collar lets rain track down into the ceiling, and a heater that runs all winter puts its flue through months of heat cycling that can work a joint apart and leak smoke into the roof space.
A camera inspection sorts out which of these you have, and it is photographed so the quote is for what has actually failed. On the masonry side we repoint the weathered joints, replace spalled bricks to match, rebuild the crown and refit the cap. On the steel side we reseat and secure joints, refit or replace flashing kits and collars, and replace corroded sections. A stainless liner is quoted where an old town flue has cracked internally.
Repointing, brick replacement, crowns and caps for Melton's old town-centre stacks, and flashing and joint repairs for the steel heater flues on its blocks and estates.
The face of an old Melton town stack that takes the weather loses its mortar first, and rain then drives straight into the brickwork. We repoint the weathered joints in a mortar suited to the old brick and replace only the bricks whose faces have gone.
The flashing kit and storm collar around a heater flue on a Melton block sit in sun all summer and rain all winter until the seal lets go, and water tracks down the flue into the ceiling. We refit or replace the kit and collar rather than sealing over them.
A heater that carries a semi-rural home through winter puts its flue through months of heat cycling, and a joint above the ceiling can work apart. We camera the run, reseat and lock any parted section and photograph it closed.
Real photos from Melbourne jobs — not stock, not staged.




An old Melton stack that has lost its cap and some mortar does not automatically need rebuilding, and a heater flue leaking at the collar does not need a new flue. We inspect and photograph, then quote the specific repair.
Photos of the finished work come with the invoice, so you can see the repointed face, the refitted collar or the locked joint for yourself without getting up on the roof.
Documented end to end — every job, every suburb.
Camera and photo inspection of the stack, crown, flashing and flue.
We find the real cause — water, movement or heat — and explain it.
A firm price for only what is needed, before any work.
Masonry, crown, flashing or flue work done properly and safely.
Draw and weather-tightness confirmed.
Before and after photos and honest advice on what to watch.
Verified 5-star reviews from across FreshDuct’s duct, heating, cooling and chimney services.
“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
“Highly impressed with the professionalism and efficiency. On time, and no mess left behind.”
Verified
“Exceeded my expectations. Knowledgeable, meticulous and respectful of our home.”
Verified
“So glad I chose FreshDuct. Knowledgeable team and the whole process was smooth from start to finish.”
Verified
“Quick, efficient and professional — we could immediately feel the difference.”
Verified
“The technician arrived on time and was incredibly thorough — the difference at home is obvious.”
Verified
The same local team covers the suburbs around Melton. Explore nearby areas and related FreshDuct chimney services.
Rarely. Lost mortar on the windward face and a missing cap are the two most common faults on old town-centre stacks, and both are repaired rather than rebuilt: the joints repointed, spalled bricks replaced, the crown made good and a cap refitted. A rebuild is only quoted if the inspection finds the stack has moved.
On a steel flue it is nearly always the flashing kit or storm collar where the flue passes through the roof, perished after years of sun and rain. We camera and photograph it, then refit or replace the kit so the seal is sound, rather than replacing the flue.
White staining, crumbling mortar, loose or missing bricks, rust marks on the roof, water in the firebox after rain, or smoke seeping into rooms are the usual signs. A photographed inspection tells you what is cosmetic and what is not.
Yes — stainless steel liners for cracked or unlined flues on open fireplaces and wood heaters, quoted firm after a camera inspection. Gas flue work goes through the licensed gas specialists we arrange.
Often, with roof access and harness work. Taller or unstable stacks need scaffold, and we tell you before quoting rather than after.
Send your details and the office confirms a window for Melton. No call-out fee, before and after photos, and honest advice on what your chimney needs and what it does not.