“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
The repairs Werribee flues need are mostly at the roof: a perished boot on a Colorbond sheet, a lifted flashing plate on tiles, a joint that has opened. FreshDuct finds the fault with photos and a camera, then fixes that and nothing else.
Drip down the flue after rain in a Werribee estate home? Start with the flashing kit, not the heater.
A steel flue on a Wyndham estate home does not crumble the way a brick stack does, but it does fail, and it fails at the roof. Where the flue passes through a Colorbond roof the rubber boot of the flashing kit hardens and splits in the sun; where it passes through tiles the flashing plate lifts or its sealant gives way. Either lets water run down the outside of the flue into the ceiling, and it shows as a stain beside the heater.
Inside the flue the faults are joints and sections. A flue section can separate at a joint after years of heating and cooling, a cowl fixing can shear, and the top section can rust through where weather sits on it. On a gas log fire flue we inspect and repair the flue and terminal; anything on the appliance goes to the licensed gas specialists we arrange, so the job is done properly at both ends.
The older township near Watton Street and Werribee Park is the exception, with its established brick and weatherboard homes and the occasional traditional chimney. There the work is masonry: repointing mortar the weather has hollowed out, replacing a spalled brick, rebuilding a crown, and relining an unlined flue if the camera finds it cracked. Every job, steel or brick, starts with a photographed inspection and a firm quote for the part that failed.
Flashing kit, joint and section repairs for the steel flues of Werribee's estates, and repointing, crown and relining work for the township's brick chimneys, quoted after inspection.
The flashing on a Werribee estate roof is a rubber boot on Colorbond or a metal plate on tiles, and each fails its own way: the boot splits in the sun, the plate lifts and its sealant lets go. We replace or reseal the right one and photograph it closed.
A gas log fire in a Werribee estate home depends on its flue and terminal to vent safely, and a blocked or separated flue is a real hazard. We inspect and repair the flue side; the appliance itself is the work of the licensed gas specialists we arrange.
The traditional chimneys near Watton Street have taken decades of western weather on their mortar and crowns. We rake and repoint hollow joints in matched mortar, replace spalled bricks, and rebuild the crown so the stack sheds rain again, with photos before and after.
Real photos from Melbourne jobs — not stock, not staged.




When water shows beside a heater in a Werribee estate home, the flue itself is rarely the cause. We go up, photograph the flashing kit and the cowl, run the camera down the flue, and quote the one part that has let go.
A replaced boot or resealed plate is photographed from the roof when it is done, so you can see the join is closed before the next rain rather than waiting to find out from the ceiling.
Documented end to end — every job, every suburb.
Camera and photo inspection of the stack, crown, flashing and flue.
We find the real cause — water, movement or heat — and explain it.
A firm price for only what is needed, before any work.
Masonry, crown, flashing or flue work done properly and safely.
Draw and weather-tightness confirmed.
Before and after photos and honest advice on what to watch.
Verified 5-star reviews from across FreshDuct’s duct, heating, cooling and chimney services.
“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
“Highly impressed with the professionalism and efficiency. On time, and no mess left behind.”
Verified
“Exceeded my expectations. Knowledgeable, meticulous and respectful of our home.”
Verified
“So glad I chose FreshDuct. Knowledgeable team and the whole process was smooth from start to finish.”
Verified
“Quick, efficient and professional — we could immediately feel the difference.”
Verified
“The technician arrived on time and was incredibly thorough — the difference at home is obvious.”
Verified
The same local team covers the suburbs around Werribee. Explore nearby areas and related FreshDuct chimney services.
Usually not the flue, the flashing. On a Colorbond roof the rubber boot around the flue splits with age; on tiles the flashing plate lifts. We photograph it from the roof, replace or reseal the flashing, and check the flue joints on camera while we are there.
In most cases, yes. Hollow joints are raked out and repointed in mortar matched to the original, spalled bricks are cut out and replaced, and a cracked crown is rebuilt. We photograph the stack first and quote only that work; removal is only raised if the stack has actually moved.
White staining, crumbling mortar, loose or missing bricks, rust marks on the roof, water in the firebox after rain, or smoke seeping into rooms are the usual signs. A photographed inspection tells you what is cosmetic and what is not.
Yes — stainless steel liners for cracked or unlined flues on open fireplaces and wood heaters, quoted firm after a camera inspection. Gas flue work goes through the licensed gas specialists we arrange.
Often, with roof access and harness work. Taller or unstable stacks need scaffold, and we tell you before quoting rather than after.
Send your details and the office confirms a window for Werribee. No call-out fee, before and after photos, and honest advice on what your chimney needs and what it does not.