“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
Melton spans an older town centre and large new estates, so both masonry chimneys and modern wood-heater flues are common. FreshDuct sweeps, inspects and services them, with photo proof.
Old town chimney or a newer wood heater? We service both across Melton, safely.
Melton has two distinct halves — an older established town centre with brick and weatherboard homes going back generations, and a vast spread of newer estates that have made it one of the west’s fastest-growing areas. Between them sit semi-rural blocks where wood heat is a way of life. That gives Melton a real spread of chimney types.
The older Melton homes tend to have unlined brick flues carrying decades of creosote, with weathered caps and mortar; the newer estate homes and acreage properties run modern wood heaters and gas fireplaces on steel flues. On the semi-rural blocks, homes near paddocks and trees also have an ember risk worth managing with a clean flue and a spark-arrestor cap.
FreshDuct sweeps, inspects and services Melton chimneys cleanly, tailoring the work to the age and setting of the home, and documents every job with before and after photos.
The things we look at first on a Melton chimney — based on the local housing and conditions.
Melton’s older brick homes usually have unlined flues carrying decades of creosote and weathered caps and mortar. We camera, sweep and repair these appropriately.
Newer Melton homes and blocks run modern wood heaters on steel flues that build creosote and need the flue, baffle and cowl checked. We service the whole system.
On blocks near paddocks and trees, a spark-arrestor cap and a clean flue matter. We fit arrestors and clear debris to help contain embers.
Real photos from FreshDuct chimney jobs. We document every job we do with before and after photos.



One local team for the whole chimney — from a routine sweep to inspections, repairs and caps.

Contained, mess-free sweep for open fires and wood heaters.
View service →

Visual, camera & drone checks with a full photo report.
View service →

For heavy, baked-on or glazed creosote a sweep can’t shift.
View service →

Leaks, cracks, flashing and masonry put right, with photos.
View service →

Cracked, unlined or failing flues repaired or relined.
View service →

Keep rain, birds and embers out and improve draught.
View service →
Every part of the chimney, handled by the one local team. Here is what each job involves on a typical Melton chimney.
Wood heater flues on estate homes are swept from the top down through the twin-wall pipe, with the baffle lifted and the firebox cleaned out. Quick, contained, no mess in the living room.
Damping a modern heater right down every night is the fastest way to glaze a flue. If yours has been run that way, a sweep will not be enough.
Inspected against the appliance specification, with clearances, joints, terminal height and flashing all checked and photographed. Useful for warranty claims.
Flue cleared and a correctly sized terminal guard fitted to the flue diameter, so the draught is unaffected and nothing can get back in.
Inbuilt units that have started to smell or smoke slightly on start-up usually need the chamber cleaned rather than the appliance repaired.
Refixed and resealed to the manufacturer detail, using a terminal matched to the flue system rather than a generic part.
A crown that has cracked within a few years of the house being built is a construction defect, not wear. It needs recasting properly.
Twin-wall flue faults on estate homes are usually separated joints, crushed insulation or a bent section from a rushed install. We repair the run and reseal to manufacturer spec.
Installing a flue on an estate home is usually a clean twin-wall run through a truss roof to a Colorbond penetration. We set the height for draught and flash the terminal to the sheet profile.
If a newer heater has never drawn properly, an undersized or badly joined liner is a common cause and worth checking before blaming the appliance.
Fitted as a matched component for the flue system, so it seals correctly and does not compromise the appliance warranty.
Repointed to the affected courses only, colour-matched to the existing mortar so there is no visible band across the stack.
Repaired or replaced with a component suited to the appliance, so it does not interfere with the manufacturer air control.
On estate homes the flue penetration through Colorbond or concrete tile is the usual leak point, often from a poorly fitted storm collar. We reflash and reseal the penetration.
A clean vertical crack running down a newer stack is a movement crack, and repairing it without addressing the cause just reopens it.
If your heater smokes when the rangehood or dryer is running, the house is competing with the flue for air. That is a ventilation fix.
Newer chimneys benefit most from sealing the crown and top courses where water gets in first. We apply a breathable sealer to the exposed masonry.
Restoration on a newer home is normally about correcting poor original workmanship rather than age. We put the crown, flashing and top courses right.
If a modern stack has moved enough to need rebuilding, the reason needs identifying first or it will happen again.
Serviced to the manufacturer schedule with door ropes, glass seals and baffles checked and replaced as needed, and documented for warranty.
Serviced to the manufacturer schedule with logs repositioned correctly, seals checked and the flue verified, documented for warranty.

A Melton town chimney and an estate wood heater are different jobs, and we tailor to each — the masonry flue for creosote, weathered caps and mortar, the steel flue for its baffle, cowl and terminal.
On semi-rural blocks we also fit spark-arrestor caps and clear leaf debris, so a hard-working flue near trees stays safe.
FreshDuct services Melton and the outer west 7 days a week. We are regularly working nearby Caroline Springs and out toward Gisborne, so Melton and its estates and blocks are part of our run.
From the older homes near the town centre to the estates through Melton South and Kurunjang, we can usually offer a prompt appointment and prioritise any flue backing smoke into the home.
A safe, documented, end-to-end service — every job, every suburb.
Visual, camera or drone inspection of the chimney and flue.
We pinpoint the real cause and explain it clearly.
Only what is needed, done properly and safely.
We confirm clearances, draw and a safe result.
Before & after photos so you see the result.
Site left clean, with honest advice.
Verified 5-star reviews from across FreshDuct’s duct, heating, cooling and chimney services.
“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
“Highly impressed with the professionalism and efficiency. On time, and no mess left behind.”
Verified
“Exceeded my expectations. Knowledgeable, meticulous and respectful of our home.”
Verified
“So glad I chose FreshDuct. Knowledgeable team and the whole process was smooth from start to finish.”
Verified
“Quick, efficient and professional — we could immediately feel the difference.”
Verified
“The technician arrived on time and was incredibly thorough — the difference at home is obvious.”
Verified
We cover Melton and the surrounding suburbs. Explore nearby areas and related FreshDuct services.
Yes. Melton has both. We camera, sweep and repair older unlined brick flues in the town centre, and sweep and check modern steel flues and wood heaters in the estates and on the acreage.
If your home is near paddocks or trees, yes. A spark-arrestor cap helps contain embers from a wood heater. We fit one and clear leaf debris from the flue when we sweep.
Yes. FreshDuct provides chimney sweeping, safety inspections, deep cleaning, repairs, caps and cowls across Melton and the surrounding outer west, 7 days a week. Call 04 3191 8137 or request a free quote.
A standard chimney sweep starts from $180 and a chimney safety inspection from $99, then quoted to your chimney, its condition and roof access. You get clear pricing up front — call 04 3191 8137.
We service Melton and nearby suburbs 7 days a week and prioritise blockages and smoke problems where a fire can’t be used safely. Call 04 3191 8137 for the soonest availability.
Yes. Every FreshDuct chimney job in Melton comes with before and after photos and honest, plain-English advice — so you can see exactly what was done and why.
Sweeping, inspections, repairs and caps — a clean, documented job with photo proof. Available 7 days.
Tell us about your chimney — we respond fast, 7 days.