🌞 Winter Specials! | 🌡️ AC, Heater & Split System Cleaning | 💧 Evap Cooler Service | 🔍 HVAC Inspections | 📞 Call Today for a Free Quote!

🌞 Winter Specials! | 🌡️ AC, Heater & Split | 💧 Evap Cooler | 🔍 HVAC Check | 📞Free Quote!

FreshDuct Air Duct Cleaning Logo
Local south-east Team Before & After PhotosNo Call-Out Fee

Chimney Repairs in Keysborough

Repairs in Keysborough split by the age of the home: flue joints, flashing kits and terminals on the estate heaters, mortar, crowns and liners on the older brick chimneys. FreshDuct inspects with a camera first and quotes only what has failed.

Smoke smell in the roof space of an estate home? A parted flue joint above the ceiling is the usual find — we check before you burn again.

A steel flue that has worked loose at a joint and a brick flue with open mortar both let hot gases where they should not go, and neither shows from the lounge room. Autumn is when to have the flue looked at, before it is asked to run every night.
Repairs by Home Age

What fails on newer and older chimneys in Keysborough

On the estate side of Keysborough the chimney is a twin-wall steel flue running from an inbuilt heater up through the ceiling, the roof space and out through a flashing kit on the tiles. The things that go wrong are joints that part where the flue was not locked properly, flashing that has lifted or perished and let water track down the flue, and terminals that have corroded. None of it is masonry, and none of it costs much if it is caught early.

The established homes across the older streets have the opposite kind of chimney: solid brick, unlined, with mortar that is now sandy at the joints, a crown that has cracked and a flashing that has been on the roof for decades. Inside, the joints between the flue bricks open with age, and where they have, the flue needs a stainless liner before it should carry another fire.

Because the two need entirely different repairs, every Keysborough job starts with a camera and photo inspection of the flue and the stack or flashing, and the quote covers only what the camera found. Flue sections are relocked or replaced and flashing kits resealed on the estate homes; brick is repointed, crowns rebuilt and liners fitted on the older ones. Gas flues are handled with the licensed gas specialists we arrange.

What's Included

Chimney Repairs in Keysborough — what we do

Flue joint, flashing, crown, mortar and relining repairs across Keysborough's newer and older homes, quoted firm after a photographed inspection.

Photographed inspection of the stack, crown, flashing, mortar and flue
Repointing and tuckpointing of weathered mortar joints
Cracked or spalling brick cut out and replaced to match
Crown and cap repairs that stop water getting into the stack
Flashing resealed or replaced where the chimney meets the roof
Flue repairs and stainless steel relining where the liner has failed
Local Know-How

Chimney Repairs in Keysborough: what is different here

Parted flue joints

A twin-wall flue in an estate home runs unseen through the roof space, and a joint that has worked loose leaks heat and smoke into it. We inspect the full run, relock or replace the section and confirm it draws before the heater is used again.

Flashing kits on tile

The rubber and metal flashing kit around a steel flue on a Keysborough tile roof perishes and lifts, letting water track down the flue into the ceiling. We reseal or replace it and check the terminal at the same time.

Old joints, cracked crowns

Keysborough's older brick chimneys have sandy mortar, split crowns and unlined flues. We repoint with a matched mix, rebuild the crown to shed water and quote a stainless liner only where the camera shows the flue joints have opened.

Real Jobs

FreshDuct chimney work, photographed

Real photos from Melbourne jobs — not stock, not staged.

Cutting out and replacing damaged bricks on a Melbourne chimney.
Cutting out and replacing damaged bricks on a Melbourne chimney.
Repointing and tuckpointing tired mortar joints on a Melbourne brick chimney.
Repointing and tuckpointing tired mortar joints on a Melbourne brick chimney.
A repaired crown and cap on a Melbourne chimney stack.
A repaired crown and cap on a Melbourne chimney stack.
A FreshDuct technician repairing a chimney on a Melbourne roof
Camera, Then Quote

Small faults fixed before they cost more

A flue joint or a flashing kit is a small repair on a Keysborough estate home if it is found early, and a large one if it has let water or heat into the roof space for a winter. The inspection is photographed and the price firm before any work.

On the older homes the same rule applies to mortar: repointing now is a modest job, and a leaning stack later is not. Photos of the fault come with the quote and photos of the repair come with the invoice.

Book Chimney repairs in Keysborough

How We Work

The FreshDuct chimney repairs process

Documented end to end — every job, every suburb.

1

Inspect

Camera and photo inspection of the stack, crown, flashing and flue.

2

Diagnose

We find the real cause — water, movement or heat — and explain it.

3

Quote

A firm price for only what is needed, before any work.

4

Repair

Masonry, crown, flashing or flue work done properly and safely.

5

Check

Draw and weather-tightness confirmed.

6

Photos

Before and after photos and honest advice on what to watch.

5-Star Rated

What Melbourne Customers Say

Verified 5-star reviews from across FreshDuct’s duct, heating, cooling and chimney services.

★★★★★

“Allen provided exceptional service — friendly, professional and went above and beyond.”

J

Jane
Wantirna South, VIC

Verified

★★★★★

“Highly impressed with the professionalism and efficiency. On time, and no mess left behind.”

R

Ralph
Brighton, VIC

Verified

★★★★★

“Exceeded my expectations. Knowledgeable, meticulous and respectful of our home.”

M

Marc
Cranbourne East, VIC

Verified

★★★★★

“So glad I chose FreshDuct. Knowledgeable team and the whole process was smooth from start to finish.”

D

David
Williams Landing, VIC

Verified

★★★★★

“Quick, efficient and professional — we could immediately feel the difference.”

J

Juliette
Croydon, VIC

Verified

★★★★★

“The technician arrived on time and was incredibly thorough — the difference at home is obvious.”

S

Verified Customer
South Morang, VIC

Verified

FAQs

Chimney Repairs in Keysborough — questions answered

We can smell smoke in the ceiling of our Keysborough home when the heater is going — what is that?

Most often a joint in the steel flue has parted above the ceiling and is leaking into the roof space. Stop using the heater until it is checked. We inspect the full flue run, relock or replace the section that has moved and confirm the flue is sealed before you light it again.

Is it worth repointing the old brick chimney on our Keysborough house if we only use the fire occasionally?

Yes, because the weather works on the mortar whether or not you light the fire. Sandy joints and a cracked crown let water into the stack, and that does more damage to the brick and the ceiling around it than an occasional fire ever will.

How do I know if my chimney needs repair?

White staining, crumbling mortar, loose or missing bricks, rust marks on the roof, water in the firebox after rain, or smoke seeping into rooms are the usual signs. A photographed inspection tells you what is cosmetic and what is not.

Do you reline flues?

Yes — stainless steel liners for cracked or unlined flues on open fireplaces and wood heaters, quoted firm after a camera inspection. Gas flue work goes through the licensed gas specialists we arrange.

Can you repair a chimney without scaffolding?

Often, with roof access and harness work. Taller or unstable stacks need scaffold, and we tell you before quoting rather than after.

Book Chimney Repairs

Chimney Repairs in Keysborough — free quote, firm price, pay after

Send your details and the office confirms a window for Keysborough. No call-out fee, before and after photos, and honest advice on what your chimney needs and what it does not.