“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
On the open plains around Lara, wind works on a chimney all year: it loosens flue sections and bracing on estate heaters and scours the mortar on the older brick stacks out on the blocks. FreshDuct repairs flashing, flues, crowns and masonry, and photographs every fix.
Flue rattling in a northerly, or a wet patch on the ceiling around it? Both are repairs, and both show up plainly from the roof.
Repair work in Lara splits neatly by the kind of home. On the estates it is nearly all about the steel flue: the rubber or aluminium flashing boot where it passes through the roof has perished in the sun, a joint has worked loose after years of gusts, or the roof bracing has loosened enough for the flue to rattle and shift. On the older blocks and acreage it is brick, with mortar scoured by the wind and crowns cracked by the seasons.
Both start on the roof with a camera and a photo set. A leak around an estate flue is usually the boot or the storm collar rather than the flue itself; a leak on a brick stack is usually the crown or the flashing. We show you the photo of the actual fault and quote that repair, and if a loose flue only needs its bracing refitted and its joints resealed, that is the whole job.
Brick repairs on the acreage are done to weather. Eroded joints on the windward face are repointed, spalled bricks cut out and replaced, and crowns rebuilt with a fall so water sheds clear of the stack. An open fire whose unlined flue has cracked gets a stainless liner sized to it. Gas fireplace flues are inspected on the flue side, with the appliance left to the licensed gas specialists we arrange.
Flue resecuring, flashing boots, crowns, repointing and stainless relining for Lara's estate heaters and acreage chimneys, quoted from photos.
Gusts across the plains work on a tall heater flue until the joints loosen and the bracing gives. We refit the bracing, reseal the joints and check the storm collar, so the flue stops rattling and stays put through the next blow.
The rubber boot sealing a steel flue through a Colorbond or tile roof cracks in sun and wind and lets water track down the outside of the flue. We replace the boot and collar and seal it to the roof properly.
Older brick chimneys on the blocks lose mortar from the windward face and crack their crowns. We repoint the weathered joints, replace spalled bricks to match and rebuild the crown to shed water away from the stack.
Real photos from Melbourne jobs — not stock, not staged.




A twin-wall flue and an old brick stack fail in different ways, and the repair should suit the one on your roof. We photograph the fault, explain it in plain terms and quote only that.
When the work is done you get photos again, so a resealed flue boot or a rebuilt crown is something you can see from your kitchen table, not just take on trust.
Documented end to end — every job, every suburb.
Camera and photo inspection of the stack, crown, flashing and flue.
We find the real cause — water, movement or heat — and explain it.
A firm price for only what is needed, before any work.
Masonry, crown, flashing or flue work done properly and safely.
Draw and weather-tightness confirmed.
Before and after photos and honest advice on what to watch.
Verified 5-star reviews from across FreshDuct’s duct, heating, cooling and chimney services.
“Allen provided exceptional service — friendly, professional and went above and beyond.”
Verified
“Highly impressed with the professionalism and efficiency. On time, and no mess left behind.”
Verified
“Exceeded my expectations. Knowledgeable, meticulous and respectful of our home.”
Verified
“So glad I chose FreshDuct. Knowledgeable team and the whole process was smooth from start to finish.”
Verified
“Quick, efficient and professional — we could immediately feel the difference.”
Verified
“The technician arrived on time and was incredibly thorough — the difference at home is obvious.”
Verified
The same local team covers the suburbs around Lara. Explore nearby areas and related FreshDuct chimney services.
Almost always the flashing boot or storm collar where the flue passes through the roof. Sun and plains wind perish the rubber and loosen the collar, and water tracks down the outside of the flue. We replace and reseal it from the roof and photograph the finished job.
It needs fixing before it gets worse. Wind loosens flue joints and roof bracing over time, and a shifting flue can open a joint inside the roof space. We refit the bracing, reseal the joints and confirm the flue is rigid before we leave.
White staining, crumbling mortar, loose or missing bricks, rust marks on the roof, water in the firebox after rain, or smoke seeping into rooms are the usual signs. A photographed inspection tells you what is cosmetic and what is not.
Yes — stainless steel liners for cracked or unlined flues on open fireplaces and wood heaters, quoted firm after a camera inspection. Gas flue work goes through the licensed gas specialists we arrange.
Often, with roof access and harness work. Taller or unstable stacks need scaffold, and we tell you before quoting rather than after.
Send your details and the office confirms a window for Lara. No call-out fee, before and after photos, and honest advice on what your chimney needs and what it does not.